PRODUCT
HOT PRODUCT
330500-02-00 Bently Nevada Velomitor Piezo-velocity Sensor
Condition:
Brand New & Original
Lead Time:
In Stock
Delivery Time:
5-7 Days
EXW Price:
$900
Payment:
T/T, Full Payment Before Shipping
The 330500-02-00 is a piezoelectric velocity sensor manufactured by Bently Nevada. Featuring a solid-state design, it is specifically engineered to measure the absolute vibration (relative to free space) of bearing housings, machine casings, or structural components.
Functions & Advantages
The Bently Nevada 330500 piezoelectric velocity sensor is primarily utilized for vibration velocity measurements; it converts mechanical vibrations into electrical signals, thereby providing accurate data for monitoring and analysis purposes. The sensor incorporates solid-state electronic technology and contains no moving parts, eliminating concerns regarding mechanical degradation or wear. It can be mounted vertically, horizontally, or at any arbitrary angle.
Parameters
- Sensitivity: 3.94 mV/mm/s (100 mV/in/s) ±5% (at 100 Hz, 20–30°C)
- Frequency Response: 4.5 Hz to 5 kHz (±3.0 dB); 6.0 Hz to 2.5 kHz (±0.9 dB)
- Velocity Range: Maximum 1270 mm/s (50 in/s)
- Peak Amplitude Linearity: ±2% (within 152 mm/s peak)
- Transverse Sensitivity: Less than 5% of the primary sensitivity
- Mounted Resonant Frequency: Greater than 12 kHz
- Operating Temperature: -55°C to +121°C (-67°F to +250°F)
- Output Bias Voltage: -12 ±3.0 VDC (referenced to Pin A)
- Broadband Noise Floor: 0.004 mm/s (160 μin/s) rms
| Brief Introduction | |
| Manufacturer | Bently Nevada |
| Module/Order Number | 330500-02-00 |
| Description | Velomitor Piezo-velocity Sensor |
| Country of origin | USA |
| Dimension & Net Weight | 7*3cm, 0.2kg |
| Packing Weight | 1kg |
FAQ
1. What is the function of the 330500 Sensor?
—Primarily used for continuous, high-precision vibration velocity measurement.
2. What is the difference between the 330400 sensor and the 330500?
—The 330400 is an accelerometer, designed specifically for critical machinery applications where casing acceleration measurement is required. The 330500, conversely, is suitable for monitoring the mechanical condition of rolling-element bearings, as well as for applications where vibration measurements need to be expressed in velocity units.
3. Why is my newly purchased 330500 unit providing inaccurate measurements?
—This may be due to an incorrect installation configuration. Extreme care must be exercised when installing the 330500 accelerometer; it should be properly mounted on the bearing housing or the machine casing. Improper installation can degrade the sensor's amplitude and frequency response performance, or even generate spurious signals that fail to accurately reflect actual vibrations.
4. How should I troubleshoot the device if a fault occurs?
—Troubleshooting should focus primarily on the cable, connectors, and installation status. Since the 330500 sensor is a hermetically sealed, integral unit containing no internal adjustable components, if the sensor body itself is damaged, the entire unit must be replaced.
Ordering Information: 330500-AA-BB
A: Mounting Thread Adaptor Option
B: Agency Approval Option
Related Part Numbers: 330500-01-00
330500-01-04
330500-03-04
Tags:
Hot Product
BLOG
May 27,2026
Bently Nevada 2300/20 Vibration Monitoring Module in Practical Industrial Use
May 20,2026
1900/65A Display Module in Industrial Monitoring Applications
May 13,2026
18745-04 Proximitor Sensor Continues to Support Stable Machinery Monitoring in Industrial Applications
May 08,2026
Bently Nevada 177230-01-01-05 Seismic Transmitter in Industrial Vibration Monitoring Systems
About Us
Topteng Technology Trading Co., Limited
Established in 2010, Topteng has been a supplier of industrial automation spare parts for decades. Specialized in PLC, DCS, ESD and TSl fields, we provide the best automation solutions.
Address:
Units 1503-1504, No. 96-2 Lujiang Road
Siming District
Xiamen City, Fujian Province 361001
China
Copyright © 2025 Topteng Technology Trading Co., Limited All Rights reserved.